Connecting Geode to GPR
12 Jun 2020
Instructions for connecting Geode to GSSI UtilityScan software are shown in the following web video.
The Geode manuals also describe how to disable NMEA strings such as to leave only GGA enabled as some sensors require.
If your model GPR (Ground Penetrating Radar) requires a lower baud rate than can be set through our Geode Connect utility, instructions are provided at the following web link.
Change the Geode Serial Port Baud Rate
Most often you need to use a Straight-Through (Extension) cable. A NULL Modem cable will not work.