Uinta - Add an Area to the Map

31 Aug 2021

An area in Uinta can be mapped in two different ways: Manual and Auto. Manual allows the user to manually add points to the area where desired, and Auto will automatically add points to the area through a designated time or distance interval. To save an area, at least three points are required.

Add an Area Manually

  1. Verify your GPS is connected properly.

  2. Tap the orange plus button.

  3. Under Record Type, select Area.

  4. Select Manual.

  5. Tap Start.

  6. Tap the small add button at the bottom of the screen to add a point and begin your area.

  7. Move your GPS to where you would like to add the next point.

  8. Tap Add.

  9. Repeat steps 7 and 8 until you have completed your area.

    • To add a separate point while mapping your area,

      1. Select the orange plus button.

      2. Under Select Record Type, choose the kind of point you would like to map.

      3. If desired, enter information about the point (name, description, etc.).

      4. Select Save.

      5. Continue mapping your area.

  10. Tap Finish.

  11. If desired, you can enter additional information about the line.

  12. Tap Save.

 

Add an Area Automatically

  1. Verify your GPS is connected properly.

  2. Tap the orange plus button.

  3. Under Record Type, select Area.

  4. Select Auto.

  5. Enter the desired interval between each point and choose if you would like the distance between each point to be measured in feet or seconds.

  6. Tap Start.

  7. Points will automatically begin to appear for your area.

    • To add a separate point while mapping your area,

      1. Tap Pause.

      2. Select the orange plus button.

      3. Under Select Record Type, choose the kind of point you would like to map.

      4. If desired, enter information about the point (name, description, etc.).

      5. Select Save.

      6. Tap Resume.

      7. Continue mapping your area.

  8. When you have completed your area, tap Finish.

  9. If desired, you can enter additional information about the area.

  10. Tap Save.

 

Related Information

Return to the Table of Contents.