BackFRS For Generic Harvest
30 Mar 2015
Note: This page is for Generic Harvest Field Research Software (FRS) only. See the Mirus Harvest Software page for our Windows 7/8/10 compatible harvest application.
Download Instructions
Important: Prior to download, review the Release Notes document for critical settings changes.
- Find your Allegro model (2, MX, or CX) and console model (HM800 or HM400) in the column on the left.
- Follow the row to the right and click on the Download links for the FRS Note-taking software and the GrainGage software that you need.
Note: FRS 2.4 and FRS 2.2 cannot be installed on the same handheld.
The Installation Guides provide instructions for backing-up your bucket setups and for the correct steps to follow for installing or updating your FRS software. FRS Note Taking must be installed before installing the Generic Harvest module.
| Classic GrainGage | Installation Guide / Notes | Release Notes | |
|---|---|---|---|
|
Allegro MX or Allegro 2 + HM800 |
|
|
|
|
Allegro MX or Allegro 2 + HM800 |
|
|
|
|
Allegro CX + HM800 |
|
|
|
|
Allegro CX + HM400 |
|
|
|
Regular Bucket Script Files for FRS
Script files control the order and timing in which actuators move and sensor readings are taken while harvesting. Below are generally distributed script files for Regular Bucket (GHM) systems with a wiper arms. Other custom script files may be available by contacting support@harvestmaster.com.
Click on the instructions.txt file to view installation instructions (if provided). Otherwise, click on the file(s) and save them to your PC. Copy the TXT file(s) into the FRS/GenericHarvestModule folder on the Allegro field computer. Rename or overwrite any previous versions of the file(s), then run FRS.
| Regular Bucket with Test Weight Wiper Arm, With Holding Hopper | |
| Regular Bucket with Test Weight Wiper Arm, Without Holding Hopper |
Moisture Curves and Calculator
| EM Moisture Sensor Curves and Curve Calculator (HM-800 and HM-400) |
|
| Capacitive Moisture Sensor Curves (HM400 only) |
|
